Cement-based grout for durable tile joints.

Application:
Preparation:
It is essential that adequate preparation is carried out prior to the application of SpECtite Tile Grout. Tiles must be firmly fixed in place and perfectly clean before applying the grout. The gap between tiles should be approximately 2-8mm but should not exceed 8mm.
Mixing:
Place around 8 litres of water in a mixing pail with a capacity of approximately 25 litres and slowly add the SpECtite Tile Grout while mixing using a slow speed electric drill fitted with a SpECbuild Mixing Paddle. Always add powder to water and mix for around 5 minutes to achieve a lump-free paste. Leave the material to stand for 10-15 minutes prior to application.
Application Method:
Apply SpECtite Tile Grout using a small sponge or cloth, ensuring that the product is thoroughly worked into the joints and edges. Be careful to remove surplus material with a dry cloth and profile the joint either by the use of a jointing tool or the tip of a gloved finger. Once the grout has dried, use a wet sponge to carry out the final tile cleaning.
Important Note:
It is vital to clean tiles that have a surface profile prior to the grout hardening.