SpECtite WTA Latex

Two-component waterproof mortar for tile installation.

Name: SpECtite WTA Latex
Brand: SpEC
Availability: InStock

SpECtite WTA Latex is a versatile, two-component waterproof mortar designed specifically for the installation of ceramic, stone, and marble tiles. This product combines a powder component with a liquid component to create an effective adhesive suitable for various surfaces, including concrete, plaster, and masonry.
Ideal for both interior and exterior applications, it provides enhanced flexibility and shock resistance, making it an economical choice for construction projects.

Product Videos

Technical Details

The SpECtite WTA Latex is designed for a variety of tile installation applications, including:

Installation of ceramic, stone, and marble tiles over masonry, concrete, and wooden type surfaces.
Suitable for both interior and exterior use in wet and dry areas.
Applicable on walls, floors, and ceilings.
Can be used over concrete, plaster, masonry, blockwork, and gypsum boards.

The SpECtite WTA Latex offers several key advantages that make it a preferred choice for tile installation projects:

Flexible and shock resistant.
Easy to use, ensuring a smooth application process.
Economical solution for various construction needs.

The SpECtite WTA Latex is characterized by its exceptional technical properties, making it suitable for a wide range of applications:

Property	Value
Pot life @ 25°C	20 minutes
Colour	Grey or White
Yield	Approximately 14 litres
Coverage (3mm x 3mm notched trowel)	9.50 m²/pack
Coverage (6mm x 6mm notched trowel)	4.50 m²/pack
Coverage (12mm x 12mm notched trowel)	2.50 m²/pack

Application: The SpECtite WTA Latex is designed for efficient and effective application in various settings. Follow the instructions below for optimal results:

Surface Preparation:
Substrates should be structurally sound, free from dust, dirt, grease, sealers, and curing compounds. Remove old paints, coatings, and adhesives. Pre-wet porous substrates but ensure that standing water is removed. Mixing Instructions:
In a clean mixing vessel, pour the total contents of the liquid component and slowly add the powder component while mixing with a slow-speed drill (300 rpm) and paddle. Mix until a smooth consistency is obtained (2-3 minutes). Leave the mixture to stand for 10 minutes and remix before application. Application Method:
Apply SpECtite WTA Latex to a clean substrate using the flat edge of the trowel. Then, comb the product to the desired profile with the notched side of the trowel. Tap the tile with a rubber mallet to fully embed it in the adhesive. Equipment Cleaning:
Tools and equipment should be cleaned immediately using water, as once hardened, the material may only be removed mechanically.

SpECtite WTA Latex is conveniently packaged for ease of use and storage:

The product is supplied as a 30kg pack consisting of 25kg of powder and 5kg of liquid. The yield is approximately 14 litres.

For information regarding the warranty of SpECtite WTA Latex, please contact our team at SMCC using any of the contact methods available on this page. We are here to assist you with any questions or concerns you may have.

Product FAQ

Can SpECtite WTA Latex be used outdoors?

Yes, SpECtite WTA Latex is suitable for outdoor use.

What surfaces can SpECtite WTA Latex be applied on?

SpECtite WTA Latex can be applied on concrete, plaster, masonry, wooden surfaces, blockwork, and gypsum boards.

Is SpECtite WTA Latex suitable for wet areas?

Yes, SpECtite WTA Latex is suitable for wet areas.

How long does SpECtite WTA Latex take to set?

SpECtite WTA Latex has a pot life of 20 minutes.

What is the pot life of SpECtite WTA Latex?

The pot life of SpECtite WTA Latex is 20 minutes at 25°C.

How is SpECtite WTA Latex mixed and applied?

To mix SpECtite WTA Latex, pour the entire liquid component into a clean mixing vessel and gradually add the powder component while mixing with a slow-speed drill at 300 rpm. Continue mixing until a smooth consistency is achieved, which takes about 2-3 minutes. Allow the mixture to stand for 10 minutes and remix before application. For application, ensure the substrate is clean and free from contaminants. Use the flat edge of a notched trowel to spread the mixed adhesive evenly on the surface, then comb it with the notched side to create the desired profile. Finally, tap the tiles into place using a rubber mallet for proper adhesion.