SpECcoat PE400

SpECcoat PE400 is particularly suited for the following applications:
· Sewage tank protection
· Sewage pipes, manholes and effluent plants
· Chemical plant linings
· Coating steel, concrete and fibre cement pipes

SpECcoat PE400 offers a variety of benefits that make it an ideal choice for protective applications in demanding environments. Its unique formulation provides both durability and flexibility, ensuring long-lasting performance under a wide range of conditions.
· Resistant to a wide range of chemicals (see Chemical Resistance Chart)
· Excellent adhesion, flexibility, and waterproof characteristics
· High build abrasion-resistant coating
· Can be laminated with glass fibre, if required
· May be applied by brush, roller or airless spray

SpECcoat PE400 is designed with specific technical properties to ensure optimal performance in various applications:

Property	Value
Specific gravity	1.43 @ 20°C
Solids content	100%
Pot life	1 hour @ 20°C
Overcoating time	8-24 hours @ 20°C
Full cure	7 days @ 20°C
Service temperature	Dry -5°C to +65°C
Typical system thickness	400 μm (2 coats)

SpECcoat PE400 is designed for versatile application methods to ensure optimal coverage and protection:

Application Methods:
SpECcoat PE400 may be applied by brush, roller, or airless spray. The application should produce an even coverage without pinholes.
Surface Preparation:
It is essential that adequate preparation is carried out prior to the application of SpECcoat PE400. For concrete and steel surfaces, grit blasting is recommended. Steel surfaces should be prepared to bright metal standard. The preparation should ensure the removal of old coatings, laitance, grease, and oil. Any imperfections or ‘blow holes’ should be filled using SpECcoat BC.
Mixing Instructions:
SpECcoat PE400 is supplied in a two-component kit consisting of base resin and curing agent components. The two parts are produced in the correct proportions for mixing. Part mixing of the packs should not be attempted. Both components should be briefly stirred to ensure that any settlement products are fully suspended. The material should then be mixed using a suitable slow-speed electric drill with a spiral paddle attachment for three to five minutes until the product appears uniform.
Application Temperature Range:
Minimum: 5°C
Maximum: 35°C
(Note: At temperatures above the quoted maximum, the pot life will be reduced.)

SpECcoat PE400 is available in convenient packaging options:
4.5 litres and 15 litres