A single-component universal acrylic sealant,
on all porous surfaces such as brick, concrete, wood, etc. It is also suitable for filling cracks and joints both indoors and outdoors and t is a cost effective plastic-elastic sealant ideal for mainly static joints
SINGLE COMPONENT ACRYLIC SEALANT
DESCRIPTION
SpECseal Acrylic is a single component universal acrylic sealant
TYPICAL USES
SpECseal Acrylic can be used on all porous sur[1]faces such as brick, concrete, wood, etc., and suit[1]able for filling cracks and joints both indoors and outdoors. It is a cost effective plastic-elastic sealant ideal for particularly static joints.
ADVANTAGES
• Over paintable
• Very easy to apply and clean
• Waterproof after curing
• Resistant to weathering such as rain, snow and sunlight
• Solvent-free
• No odor TECHNICAL DATA
TECHNICAL DATA
Basis Acrylic dispersion
Specific gravity 1.70±0.02 g/cm³
Curing rate 1 – 2 mm/day (23°C
and 50% R.H.)
Tack-Free Time 60±20 min (23°C and
50% R.H.
Temperature resistance 10 to +80°C
Joint Movement 7.5%
Shore “A” Hardness
(DIN 53505/ISO 868) 30
Density
(ISO 1183-1) 1.71 g/ml
Tensile Strength
(DIN 53504 S2) 0.3 N/mm³
APPLICATION
Surface preparation
The joint must be clean and free from dust, grease
and rust.
HEALTH & SAFETY
SpECseal Acrylic should not come into contact
with skin or eyes or be swallowed.
Wear suitable protective gloves, eye / face protection
and overalls. If in contact with eyes rinse with clean
water and seek medical advice.
If swallowed, DO NOT induce vomiting, seek medical
attention immediately.
Avoid inhalation. Ensure adequate ventilation in con[1]fined areas
Priming
No primer is required for non-porous surfaces. On
porous surfaces such as concrete, stone, cement and
plaster, a primer (mixture of one part of acrylic
sealant and 4-5 parts of water) can be applied.
Min/max joint width must be 5mm/25mm. The rec[1]ommended joint depth/width ratio is 1:2.
Immediately after the application, smooth the
sealant at once with wet finger or a wet tool. Excess
sealant can be removed by a wet cloth. Keep the
sealed joint dry at least for two hours.
Application
• Sealing of low and medium movement joints
between various construction materials (wood,
concrete, brick, etc.)
• Filling cracks in walls and on ceilings.
• Sealing joints between windows, walls , doors,
etc.
APPLICATION TEMPERATURE RANGE
Minimum +5°C
Maximum +40°C
EQUIPMENT CLEANING
Cured sealant can be removed mechanically.
STORAGE & SHELF LIFE
SpECseal Acrylic has a shelf-life of 15 months if
stored properly.
RESTRICTIONS
SpECseal Acrylic should not be used for sealing
joints permanently exposed to water. It should not be
applied in case of risk of rain or frost. SpECseal
Acrylic is not elastic, therefore it must not be used
in expansion joints. It can painted barely with paints