SpECgrout E60

SpECgrout E60 is ideal for a variety of applications due to its robust properties and performance capabilities:

• Free-flow grout for high dynamic loading conditions.
  
• Bedding layer for mechanical joint systems.
  
• Baseplate grouting applications.
  

SpECgrout E60 offers numerous benefits that enhance its performance and suitability for demanding construction environments:

• Resistant to dynamic loading.
  
• Non-shrink formulation ensures maximum contact area.
  
• High compressive, tensile, and flexural strengths.
  
• Exceptional early strength gain.
  
• Excellent chemical resistance.
  

The technical information for SpECgrout E60 is provided below:

Test Method	Typical Results @ 20°C ±3
Compressive Strength (BS 6319 Part 2)	3 days: 65 N/mm² 7 days: 95 N/mm²
Tensile Strength (BS 6319 Part 1)	7 days: 16 N/mm²
Flexural Strength (BS 6319 Part 3)	7 days: 36 N/mm²
Pot Life	20°C: 100 mins 30°C: 50 mins 40°C: 25 mins
Chemical Resistance	Resistant to mild acids, alkalis, sea water, oil, greases, fresh and sea water, and most common chemicals.
Packaging	Supplied in 12 litre units.
Shelf Life	12 months when stored in original containers in a cool dry environment at 20°C.
Flammability	Not flammable.
Flash Point	SpECgrout E60 >150°C

The application instructions for SpECgrout E60 are outlined below:

Preparation:
All substrates should be sound and free from oils and greases and must be dry. Concrete surfaces must be scabbled or grit blasted to a sound base. Dust and debris must be removed. Steel surfaces, particularly the underside of base plates, should be grit blasted to clean bright metal. Formwork:
Formwork must be constructed which is leak proof. It is essential to provide a hydrostatic head of grout for successful grouting. A feeding hopper system should be used to achieve this. Mixing:
SpECgrout E60 is supplied in a three-component pack consisting of one tin of resin, one tin of hardener, and one bag of specially selected fillers. The base and hardener should be first mixed together in a 25-litre steel container. The powder component should be added slowly while mixing with a slow-speed drill and paddle. Complete mixing will take at least 3 minutes. Placing:
The mixed material should be poured at a uniform rate into the hopper end of the formwork. Pouring should be continuous to avoid entrapment of air. Health and Safety:
Contact with skin and eyes should be avoided when using SpECgrout E60. Inhalation of vapours should be avoided. Wear gloves, goggles, and eye and face protection. If contact occurs, rinse with copious amounts of clean water and seek medical attention if necessary.

SpECgrout E60 is available in specific packaging to ensure effective use and storage:

Supplied in 12 litre units.