SpECtite PAR800
Fibre-reinforced, single-component anti-root waterproofing membrane.
SpECtite PAR800 is an advanced fibre-reinforced, single-component waterproofing membrane designed for superior anti-root protection. This elastomeric solution effectively rejects root penetration without damaging plants, making it ideal for green roofs, roof gardens, and planter boxes.
With impressive chemical resistance and ease of application, it provides durable, moisture-tolerant waterproofing for various indoor and outdoor applications.
With impressive chemical resistance and ease of application, it provides durable, moisture-tolerant waterproofing for various indoor and outdoor applications.
Product Media
Technical Details
SpECtite PAR800 is ideal for a variety of applications due to its unique properties and durability. Typical uses include:
• Green roofs
• Roof gardens
• Planter boxes
• Suitable for indoor and outdoor installations
• Green roofs
• Roof gardens
• Planter boxes
• Suitable for indoor and outdoor installations
SpECtite PAR800 offers a range of advantages that make it an exceptional choice for waterproofing and anti-root protection. Its unique formulation and robust characteristics ensure reliable performance in various applications. The key advantages include:
• Easy and quick application
• Excellent waterproofing capabilities
• High tensile strength
• Excellent elasticity
• Moisture tolerant
• Easy and quick application
• Excellent waterproofing capabilities
• High tensile strength
• Excellent elasticity
• Moisture tolerant
SpECtite PAR800 is formulated with advanced technical specifications that enhance its performance and reliability in waterproofing applications. Below are the technical details of the product:
| Appearance | Black viscous liquid |
| Solids content | 60 ± 5% |
| Cure time @ 25°C & 50% R.H. | 12-24 hours touch dry, 7 days full cure |
| Application temperature | 5°C to 60°C |
| Shore 00/A @ 25°C | 90/30 (ASTM C836/05) |
| Tensile strength | 5 N/mm² (excl. Geotextile) ASTM D 412-98a |
| Ultimate elongation | >600% (excl. Geotextile) ASTM D 412-98a |
| Puncture resistance | >220±20 N (ASTM D4833) |
| Flashpoint | 69°C |
| Specific Gravity | 1.05 ± 0.1 |
Application Instructions:
Surface Preparation:
Concrete surfaces must be float or shutter finished. The surfaces must be free of cavities and projections. Blockwork or brickwork must be flush pointed and of a uniform finish. The surfaces should be made dry, clean, dust and frost free to expose a sound, clean substrate.
Priming Application:
Priming is not normally necessary on good quality concrete. However, for particularly porous or metal surfaces, SpECtite PAR800 Primer must be used. If the SpECtite PAR800 is not applied within 48 hours after priming, the surfaces should be re-primed.
Application Procedure:
1. Apply the first coat of SpECtite PAR800 and allow it to become tacky.
2. Apply the SpEC Geotextile and gently roll into the tacky first coat using a ribbed steel roller.
3. Once the first coat is touch dry, apply the second coat at right angles to the first coat to ensure an even coating application.
Quantity and Coverage:
The quantity of material used per coat may vary depending on the porosity of the substrate and the surface profile. As an average on a smooth surface, the coverage rate for SpECtite PAR800 is 1m²/litre at 1mm wft.
Spray Application:
Only airless spray should be used. Recommended settings include a Graco King 60 to 1 ratio or similar.
Surface Preparation:
Concrete surfaces must be float or shutter finished. The surfaces must be free of cavities and projections. Blockwork or brickwork must be flush pointed and of a uniform finish. The surfaces should be made dry, clean, dust and frost free to expose a sound, clean substrate.
Priming Application:
Priming is not normally necessary on good quality concrete. However, for particularly porous or metal surfaces, SpECtite PAR800 Primer must be used. If the SpECtite PAR800 is not applied within 48 hours after priming, the surfaces should be re-primed.
Application Procedure:
1. Apply the first coat of SpECtite PAR800 and allow it to become tacky.
2. Apply the SpEC Geotextile and gently roll into the tacky first coat using a ribbed steel roller.
3. Once the first coat is touch dry, apply the second coat at right angles to the first coat to ensure an even coating application.
Quantity and Coverage:
The quantity of material used per coat may vary depending on the porosity of the substrate and the surface profile. As an average on a smooth surface, the coverage rate for SpECtite PAR800 is 1m²/litre at 1mm wft.
Spray Application:
Only airless spray should be used. Recommended settings include a Graco King 60 to 1 ratio or similar.
SpECtite PAR800 is available in convenient packaging options to meet your project needs:
Pack Size: SpECtite PAR800 is supplied in 18 litre drums.
SpECtite PAR800 Primer: Supplied in 5 litre and 15 litre drums.
Shelf Life: SpECtite PAR800 has a shelf life of 8 months when stored in original containers in cool, dry conditions. SpECtite PAR800 Primer has a shelf life of 12 months when stored in original containers. Protect the material against moisture and direct sunlight.
Pack Size: SpECtite PAR800 is supplied in 18 litre drums.
SpECtite PAR800 Primer: Supplied in 5 litre and 15 litre drums.
Shelf Life: SpECtite PAR800 has a shelf life of 8 months when stored in original containers in cool, dry conditions. SpECtite PAR800 Primer has a shelf life of 12 months when stored in original containers. Protect the material against moisture and direct sunlight.
For warranty information regarding SpECtite PAR800, please contact our SMCC team for assistance. You can reach us through any of the contact methods available on this page for more details.
Product FAQ
Yes, SpECtite PAR800 can be applied in temperatures ranging from 5°C to 60°C.
The recommended application thickness for SpECtite PAR800 is 1.5 to 2mm.
SpECtite PAR800 takes 12-24 hours to become touch dry and fully cures in 7 days.
Yes, SpECtite PAR800 can be applied using airless spray equipment.
SpECtite PAR800 is suitable for concrete surfaces, blockwork, and brickwork that are float or shutter finished and free of cavities, dust, and frost. It can be used on both indoor and outdoor installations.
Yes, SpECtite PAR800 can be applied on metal surfaces, but for particularly porous or metal surfaces, it is recommended to use SpECtite PAR800 Primer before application.
SMCC AI
Ask it Anything!
- Products We Offer
- Product Spread Rate.
- Calculate Quantities
- Services We Offer.
Related Products
SpEC Black Bitumen Paint
View ProductCOLPHENE BSW H 4.5
View ProductCOLPHENE BSW BASE 4.0
View ProductSpECtite DP60
View Product
Get a call back
For inquiries about SpECtite PAR800, including technical support and application guidance, please fill out the contact form. Our dedicated team at SMCC is ready to assist construction and contracting companies in optimizing their waterproofing solutions and ensuring project success with our advanced products.