Single-component bonding agent for cementitious repairs.

The application process for SpECbuild Primer S1 involves the following key steps:

Preparation:
It is essential that adequate preparation is carried out prior to the application of SpECbuild Primer S1. The prepared surface must be free from laitance, dust, algae, oil, and grease. Additionally, the substrate should be pre-soaked with clean water for one hour before proceeding with the repair. Application:
SpECbuild Primer S1 is applied to a thoroughly prepared substrate. It is crucial to scrub the primer into the substrate while avoiding the formation of puddles of excess material. The selected repair mortar should be applied while the primer is still tacky to ensure optimal adhesion. Equipment Cleaning:
SpECbuild Primer S1 may be removed with water immediately after use. However, cured material can only be removed mechanically. Health and Safety:
Contact with skin and eyes should be avoided during the application of SpECbuild Primer S1. Always follow safety guidelines to ensure a safe working environment.