High-performance epoxy coating for durable floors.

Application
It is essential that adequate preparation is carried out prior to the application of SpECtop ARE125.
Preparation
Light sweep blasting is strongly recommended to ensure the removal of all laitance, grease, and oil. For a slip-resistant profile, the first coat of SpECtop ARE125 should be completely blinded with SpECtop NS GRAINS. This should be carried out while the coating is still wet. When the first coat has reached its initial cure (12 hours @ 20°C), the excess aggregate should be removed, and the surface vacuumed to remove any residue. The topcoat is then applied.
Mixing
SpECtop ARE125 is supplied in a two-component kit consisting of a pigmented base component and a curing agent. Both components should be briefly stirred to ensure that any settlement products are fully suspended. The entire contents of the curing agent should be emptied into the base components, ensuring that the sides of the curing agent tin are carefully scraped to remove all material.
Application Method
The mixed product may be applied by brush or roller. The quantity of material used per coat and the number of coats may vary depending on the porosity of the substrate and the surface profile. The application of excessive volumes of product should be avoided as this will result in solvent entrapment affecting both surface finish and the subsequent performance of the coating.
Slip Resistant Finish
If a slip-resistant finish is to be provided, then SpECtop NS GRAINS is required. SpECtop NS GRAINS are supplied in pre-weighed bags.